Mounted Units

		Home \| English \| Français

		`

	Mounted Units Mounted units offer a compact and economical design. The housing is typically made of grey cast iron and is designed to accommodate an insert bearing and a bearing relubrication feature.

NSK SPLIT BLOCKS
NSK pillow blocks are designed for exceptional performance in a wide range of applications. They are tremendous at keeping water and contaminants away from the bearing while keeping lubrication inside the housing. The housing comes standard with a triple-ring labyrinth seal but for applications where contamination is a greater concern, taconite seals are available.

SNN

This split housing from NSK combines quality materials and design to maximize bearing performance. The SNN series comprises a number of housings which, when combined with different seal options and ball or spherical roller bearings, provide an answer for most split block applications with shaft diameters ranging from ¾” to 5.1/2”.

FEATURES

• Large bath oil
• High-grade bolts
• Rib for bearing seat
• Webs for heat transfer
• Solid corners for locating pins

BENEFITS

• Rib prevents deformation of
bearing seat
• Center marks facilitate
alignment
• Maximum heat transfer from
unit
• Ribs for rigidity reduce possible
block warping

SAFD

Available in ductile iron, NSK's SAFD split housings are made with a precision machined bearing seat, solid corners for locating pins, and are designed for either grease or oil lubrication with a large oil reservoir. Bore sizes range from 1-7/16” up to 7-15/16”.

FEATURES

• Large bath oil
• High-grade bolts
• Rib for bearing seat
• Webs for heat transfer
• Solid corners for locating pins

BENEFITS

• Rib prevents deformation of
bearing seat
• Center marks facilitate
alignment
• Maximum heat transfer from
unit
• Ribs for rigidity reduce possible
block warping

E-CATALOGUE

SPLIT PILLOW BLOCK HOUSINGS DOWNLOAD

BACK